L-823 Primary Connector Kits

Integro Primary Connector Kits are used to install Isolation Transformers into series circuits, and to make serviceable splice connections or test points in L-824 Airfield Lighting Cable on primary power circuits.

Request For Quote

Description

Application/Design

Integro Primary Connector Kits are used to install Isolation Transformers into series circuits, and to make serviceable splice connections or test points in L-824 Airfield Lighting Cable on primary power circuits.

Where They are Used

Integro Primary Connector Kits are used on all installations with our transformers and are installed in all the same regions.

Approvals

Integro Primary Connector Kits are approved to the FAA L-823 specification and are certified by Intertek Testing Labs to FAA Advisory Circular 150/5345-26.

Click Here for L-823 – Primary Connector Kits Certification

Design

Integro Primary Connector Kits are molded in thermoplastic rubber for superior dielectric strength, and to ensure watertight connections in the field. Each molded kit housing is filled with insulating silicone to fill voids. They are rated 25 Amps and 5,000 Volts.

 

The “Complete Kit” has 3 features that make it superior to any other kit, and eliminates the need for Heat Shrink
Extended Strain/Bend Relief prevents the back end of connector from opening and allowing water to enter. The extended Strain/Bend Relief also keeps the cable straight in main housing when installed thereby making the primary seal better.
Integrally Molded O-Rings (3 of them) sweep debris from the cable jacket and grab hold to provide added sealing thereby completely eliminating water entry to the connection.
Roll over Flap on front of the connector provides an added water seal when installed to a transformer.

 

Airfield Lighting Power – L823 “Complete Kit” Primary Connector Kit Style 3 & 10
FAA Listing
Integro Part #
Cable
Min/Max OD
L-823
11805-01
8 AWG
.300″/.400″
L-823
11805-02
6 AWG
.380″/.500″
L-823
11805-04
6 AWG
.300″/.400″
L-823
11805-05
8 AWG
.380″/.500″
L-823
11805-08
8 AWG
.530″/.630″
L-823
11805-09
6 mm²
.300″/.400″
L-823
11805-10
6 mm²
.380″/.500″

Ordering Information – XX = Cable Size (01, 02, 04, 05, 08, 09, 10)

 

Request For Quote


Airfield Lighting Power – L823 Primary Connector Kit Style 3 & 10
FAA Listing
Integro Part #
Cable
Min/Max OD
L-823
11174-01
8 AWG
.320″/.430″
L-823
11174-02
6 AWG
.410″/.585″
L-823
11174-04
6 AWG
.320″/.430″
L-823
11174-05
8 AWG
.410″/.585″

Ordering Information – XX = Cable Size (01, 02, 04, 05)

 

Each Primary Connector Kit includes:

  • Style 3 male Pin – Style 10 female Receptacle
  • Style 3 male Housing – Style 10 female Housing
  • Instruction Sheet – Paper Wipe for cleaning

 

Request For Quote